The perfect combination of the modern mezzanine and the loft bed. A big double bunk bed with free space underneath it. It converts small rooms into comfortable and functional duplexes with two areas, without works or walls.
To install the mezzanine without works no additional accessories are required, as the kit comes with everything you need.
It is a hybrid mezzanine, a combination of both the metal mezzanine TS8 and the lateral stairs. A large loft bed that leaves all the space under it free. The hybrid mezzanine TS8 is designed to split small rooms with high ceilings, although its design makes it a decoration alternative in any space.
The loft bed TS 8 with lateral stairs consists of a mezzanine, that is extensible up to 8m². It is designed for a double mattress and two bedside tables. The landing eases the access to the sleeping area whilst the space underneath is left free as a study or sitting area. The adjustable lateral stairs allow the bed to be accessed without taking up useful space in the lower area, thanks to its specific design.
The fixation of the mezzanine depends on its configuration and on the place where it is installed. It is necessary to stabilize the mezzanine as shown below.
|Kind of product||Full Kits|
|Maximum height above the flooring board (cm)||233|
|Minimum height above the flooring board (cm)||160|
|Beam height (cm)||10|
|Flooring material||European Radiata pine plywood 18 mm thick|
|Height-adjustable every (cm)||12,1|
|Which height above the flooring board is needed?||From 160 to 173 cm, From 173 to 209 cm, From 209 to 233 cm|
|Width/Lenght-adjustable every (cm)||10|
|Maximum width (cm)||257|
|Minimum width (cm)||258|
|Maximum length (cm)||275|
|Minimum length (cm)||155|
|Maximum area (m²)||8|
|Minimum area (m²)||3|
|Total maximum load (Kg)||1400|
|Load capacity in its minimum extension (kg/m²)||700|
|Load capacity in its maximum extension (kg/m²)||200|
|Net weight (Kg)||263|
|Gross weight (Kg with packaging)||295|
we recommend to fix the structure to the floor and to 2 walls to ensure its stability. If the floor fixation is not possible, you can install the pillar bases. And if the structure cannot be fixed to the walls, you may add the stability kits.
Regarding the stairs fixation, they can be fixed directly to the mezzanine.
Thank you very much.
in principle, the full kits include the items that are specified. Should you require any modification, you will have to purchase the items separately.
Hope having helped you.
Thanks & Regards
the pillars can only be moved 1/4 of the total lenght of the beam.
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
Tecrostar products can be installed outdoors (exposed to the elements), provided that a series of special measures are taken during installation and that you carry out regular maintenance in order to ensure that the materials are in good condition. The recommendations are the following:
No, our mezzanines are sold with columns by default. We cannot guarantee the resistance of walls or corbels and the customer will be responsible if the product is modified in these cases.
You can adjust the structural floor, working around architectural barriers or irregular surfaces.
When the walls are irregular or when you want to work around a fixed object, the decking can be finished off against the wall
Adjustment from below:
Adjustment from above:
Yes. This is quite common and the results are very good. The telescopic system of the columns enables the height to be adjusted every 12 cm, so in the worst case scenario you will have a 6cm difference.
For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 6 and 8 weeks days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.
If we cannot meet this delivery time, we will contact you.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg). The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.