M Stair Landing
M Stair Landing

Stair landing M

The Stair Landing M for the upper landing of the stairs is useful when you want to place the stairs parallel to one side of the mezzanine and outside it, as shown in the picture below.

Features:

This kit consists of a special pillar with a support for the primary beam. On the other side, the stair landing is attached to the existing mezzanine by 2 small telescopic secondary beams.

Its width is adjustable according to the specified measurements. The stair landing kit includes the flooring boards to cover its surface, provided that the width is set up to a maximum of 122 cm. If the stair landing is set with a bigger width, you will need to acquire an extra flooring board.

Dimensions:

Length: 85 cm. You can extend this dimension by buying a Stair Landing Extension M kit.

Width: From 103 cm to 183 cm.

Height: exactly the same as the M range.

 

More details

456,00 €

Stair landing M

Stair landing M

The Stair Landing M for the upper landing of the stairs is useful when you want to place the stairs parallel to one side of the mezzanine and outside it, as shown in the picture below.

Features:

This kit consists of a special pillar with a support for the primary beam. On the other side, the stair landing is attached to the existing mezzanine by 2 small telescopic secondary beams.

Its width is adjustable according to the specified measurements. The stair landing kit includes the flooring boards to cover its surface, provided that the width is set up to a maximum of 122 cm. If the stair landing is set with a bigger width, you will need to acquire an extra flooring board.

Dimensions:

Length: 85 cm. You can extend this dimension by buying a Stair Landing Extension M kit.

Width: From 103 cm to 183 cm.

Height: exactly the same as the M range.

 

Sending, please hold on

Question send

There was a problem

Accessories

More info

Esquema descansillo

Data sheet

Kind of productStairs & Ladders
RangeMedium
CompatibilityMedium
Maximum height above the flooring board (cm)282
Minimum height above the flooring board (cm)209
Beam height (cm)20
Height-adjustable every (cm)12,1
Which height above the flooring board is needed?From 209 to 233 cm, From 173 to 209 cm, From 233 to 282 cm
Kind of stairsAccesories
Flooring materialEuropean Radiata pine plywood 18 mm thick

Questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!
Add product questions
Hide form
Name:
Email:
Question:
Language:
  Add product questions

Faqs

    What does the kit include?

    Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

    • All the beams and columns
    • The floor panels
    • All the nuts and bolts
    • Wall anchors
    • Assembly manual
    • Anchors for anchoring the columns to the floor

    Personalised phone or email service from our specialists


    Where can I put the stairs?

    The stairs can be placed in different positions, increasing the possible configurations

    Case 1: Exterior stairs, perpendicular to the mezzanine.

    Case 2: Interior stairs. You will need a beam for interior stairs.

    Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.

    Case 4: A different placement to our mezzanines.


    Can the stairs be placed outdoors?

    Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details


    Can the stairs be anchored to a mezzanine or construction wall?

    Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.


    How are the stairs anchored to the top?

    If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:

    Anchor A

    References that have this anchor: 30501, 30401, 31003, 31301, 31102

     

     

    Anclaje B:

    Referencias que llevan este anclaje: 30303-0

     

    Anchor C:

    References that have this anchor: 30601, 30801


    Do they meet the building regulation and can they be used inside a house to access the 2 nd floor?

    It depends on the use. The regulation is for stairs for common use and our stairs are for private use. Our stairs that comply are the 42nd: Long Stair M  and  L Stair


    Can the angle of inclination be changed?

    Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.


    What is the delivery time?

    For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 6 and 8 weeks days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.

    If we cannot meet this delivery time, we will contact you.


    How is the product shipped and received?

    Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).


    How do I get the product up to my home?

    Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.  The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).  The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.


    Stair comparison

    Characteristics of the materials

    Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

    • The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
    • Structure hardware grade 8.8
    • Anodized aluminium apt for outdoor use
    • The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
    • Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

    TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados