Enlargement "B" T8
Enlargement "B" T8

'B' Extension TS 8

'B' Extension TS 8 allows you to enlarge the mezzanine on the same direction as secondary beams; indeed, you needn’t dismantle the whole mezzanine.

You can get up to 16m² of  mezzanine.

Features

This kit contains 2 double height-adjustable columns, a lightweight frame with adjustable length and width. (extensible to 8m²) with the same characteristicas as TS 8 structure and structural wooden board to cover the surface.

 

1 736,00 €

Free shipping from 2000€

'B' Extension TS 8

'B' Extension TS 8

'B' Extension TS 8 allows you to enlarge the mezzanine on the same direction as secondary beams; indeed, you needn’t dismantle the whole mezzanine.

You can get up to 16m² of  mezzanine.

Features

This kit contains 2 double height-adjustable columns, a lightweight frame with adjustable length and width. (extensible to 8m²) with the same characteristicas as TS 8 structure and structural wooden board to cover the surface.

 

Sending, please hold on

Question send

There was a problem

Accessories

Data sheet

Type of productExtensions kits
RangeSmall
CompatibilitySmall
Maximum height above the flooring board (cm)233
Minimum height above the flooring board (cm)160
Available heights above beams (cm)158, 171, 183, 195, 207, 219, 232
Height-adjustable every (cm)12,1
Total maximum load (Kg)1400
Beam height (cm)10
Width/Length-adjustable every (cm)10
Maximum length of the primary beam (cm)275
Minimum length of the primary beam (cm)155
Maximum length of the secondary beam (cm)257
Minimum length of the secondary beam (cm)152
Maximum area (m²)8
Minimum area (m²)3
Load capacity in its minimum extension (kg/m²)600
Load capacity in its maximum extension (kg/m²)200
Material and finish of the structureStructural steel painted with powder coating

Questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!
Add product questions
Hide form
Name:
Email:
Question:
Language:
  Add product questions

Questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!
Add product questions
Hide form
Name:
Email:
Question:
Language:
  Add product questions

Faqs

    What does the kit include?

    Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

    • All the beams and columns
    • The floor panels
    • All the nuts and bolts
    • Wall anchors
    • Assembly manual
    • Anchors for anchoring the columns to the floor

    Personalised phone or email service from our specialists


    Do they support the same weight as the main structure?

    Yes. They have the exact same specifications as the initial structure.


    Can I add an extension in the future?

    Yes, you can add an extension to an existing mezzanine. You do not need to buy both structures at the same time.


    Can an extension be installed to a mezzanine from a different range?

    No, the extension cannot be integrated and share columns. However, structures can be placed side by side and achieve continuity of the floor but you will not save any columns and there will be two columns together at the joints.


    How is it installed?

    To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accident.

    When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.

    You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)

    You can find all the tools required to assemble it and tested by Tecrostar in the tools section.

    All the models are installed by following these steps:

    Pre-assemble the structure on the floor in the desired area.

    Raise the outer structure to the desired height.

    Finish assembling the structure and floor.


    How long does it take to install?

    You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.

    TS8 Mezzanine: 3 hours with 2 people

    TM15 Mezzanine: 4 hours with 2 people

    TL30 Mezzanine: 5 hours with 3 people

    The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.


    Characteristics of the materials

    Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

    • The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
    • Structure hardware grade 8.8
    • Anodized aluminium apt for outdoor use
    • The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
    • Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

    TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados