LED panel with remote control

The LED Panel with remote control has a stylish aluminium finish, an aluminium frame white lacquered and an ultra-slim design of just 9 mm. Placed with a simple system of powerful magnets, attached to the lower part of the beams, it offers an integrated look not deducting free space underneath the beams. Suitable for any disposition in the beams of Tecrostar mezzanines.

The 2-side LED lighting system emits 3600 Lumens of brilliance with a consumption of 40 W, what means an important energy saving. With an immediate starting and without noises or blinks, this LED panel is ideal for places where you want to increase the illuminated space, projecting the light uniformly and glare-free. It spreads the light uniformly over a 120º beam angle.

Just using two units located 2.5 meters high, you can light a 15 m² surface, getting a quite high light level (500 lx approx.)

*You can control up to 50 panels.

This product includes the LED panel, a remote control and a magnet kit.

Installation. The customer should make the electric assembly by installing the wiring and the mains plug.

The panel can be located in any primary or secondary beam placing in advance the four magnets included.

Technical parameters

Beam Angle: 120º

Life Hours:  30.000 Hours

Certification: CE & RoHS

Dimmable: Yes

Energy efficiency class: A+

Detection Distance: 8-12 m

Dimensions: 1195x295x10 mm

Material: Aluminium / PC

Voltage: 220-240V AC

Frequency: 50-60 Hz

Power: 40 W

Light Source: SMD2835

Light output: 3600 lm

Colour Temperature: Selectable colour temperature

Frame: 120x30 cm

Power Factor: 0.90

Includes: Remote Control

Ambient temperature range: -20°C ~ +45°C

Use: Indoor

Lens Type: Opal

Colour Rendering Index (CRI): 80

Protection class: II

Luminous efficacy: 90 lm/W

Warranty: 2 years