T15 Stability kit
T15 Stability kit

Stability Bar M

The Stability Bar M is needed when the mezzanine cannot be fixed to 2 or more walls.

The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.

Features:

The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.

The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.

85,00 €

Stability Bar M

Stability Bar M

The Stability Bar M is needed when the mezzanine cannot be fixed to 2 or more walls.

The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.

Features:

The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.

The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.

Enviando, espera por favor...

¡Tu pregunta ha sido enviada! Te contestaremos tan pronto como sea posible.

¡Lo siento! Ha ocurrido un error enviando tu pregunta.

Customer ratings and reviews

Nobody has posted a review yet
in this language

Accessories

Data sheet

Kind of productStability kits
RangeMedium
CompatibilityMedium
Which height above the flooring board is needed?From 173 to 209 cm, From 209 to 233 cm, From 233 to 282 cm

Questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!
Add product questions
Hide form
Name:
Email:
Question:
Language:
  Add product questions

Reviews

Faqs

    Characteristics of the materials

    Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

    • The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
    • Structure hardware grade 8.8
    • Anodized aluminium apt for outdoor use
    • The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
    • Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

    TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados